Spuhr SAKO ARS Series Aesthetic Rings

Manufactured to be regarded as a superb item for nearly any individual, we're certain you'll appreciate the Spuhr SAKO ARS Series Aesthetic Rings . Designed using some of the best accessible substances and design, these Riflescope Mounts, Rings, and Bases from the product professionals at Spuhr will last an exceptionally lengthy time. For a quite a while, Spuhr has been generating quality goods, and the Spuhr SAKO ARS Series Aesthetic Rings is evidence of their persistence for making sure that you have the products you'll need to thrive in virtually any situation. At Night-Optics, our job is to ensure you depart with the ideal product for your needs, and the Spuhr SAKO ARS Series Aesthetic Rings is amongst the many products that we are enthusiastic to be able to provide our customers. And because you won't be charged for delivering on orders of $49 or more, there's never been an even better time to purchase the incredible Spuhr SAKO ARS Series Aesthetic Rings. For a fantastic way to be sure that you are working with some of the finest equipment, purchase the Spuhr SAKO ARS Series Aesthetic Rings.

Hunting rings for 36 mm tube on SAKO OptiLock bases/rails. Features two plain classic top covers.

Height: 23 mm/0.91in

Weight: 79 gram/2.8 oz

The ARS-series of aesthetic rings for Optilock scope mounts combines the advantages of Spuhrs patented

diagonally cut rings and interfaces with the aesthetics of traditional hunting rings. The rings are available in three

versions: the standard version with one plain ring and one ring featuring a Spuhr interface, a version featuring Spuhr

interfaces on both rings (article numbers ending with A,) and the classic version without Spuhr interfaces (article

numbers ending with B.)

Installation

The Sako Aesthetic ring set is a replacement part for Optilock scope mounts, using the original Optilock screws to

fasten the rings to the scope mount. To install the rings begin by carefully aligning the two lower halves with each

other. Any misalignment may result in marring of the scope tube. Tighten the base screw so that the front surface of

the ring is parallel with the ring base. Seat the Rifle Scope in the rings and tighten the screws in a crossing pattern

evenly over the four screws. We also recommend using of powdered rosin in the rings to prevent movement.

Torque

The ring screws should be torqued to 15.9-17.8 in/lbs (1.8-2.0 Nm) depending on the scope manufacturers

recommendation.

Spuhr Interfaces

On A and B models the position of the Spuhr interfaces can be alternated between 12, 3, and 9 oclock depending on

the rotation of the lower halves and the rotation of the top cover:

- To position the Spuhr interfaces in the 12 oclock position the lower halves

can have the opening facing either left or right.

- To position the Spuhr interfaces in the 3 oclock position the lower half

should be positioned so the opening is facing to the right (from the

shooters perspective.)

-To position the Spuhr interfaces in the 9 oclock position the lower half

should be positioned so the opening is facing to the left (from the shooters

perspective.)

Package Contents:

• Spuhr SAKO ARS Series Aesthetic Rings