Hi-Lux Optics Off-Set Plates with 1/2in 60 Degree Base

Fabricated to be described as a great item for almost any individual, we are positive you are going to enjoy the Hi-Lux Optics Off-Set Plates with 1/2in 60 Degree Base . Established utilizing some of the very most durable and long lasting resources in existence, these Riflescope Mounts, Rings, and Bases from Hi-Lux Optics provides you with a product that gives you years of reliability. For a very long time, Hi-Lux Optics has been generating high-end products, and the Hi-Lux Optics Off-Set Plates with 1/2in 60 Degree Base is proof of their persistence for ensuring that you have the items you'll want to succeed in virtually any situation. Here at Night-Optics, we make it our responsibility to ensure you get the perfect solution for all of your preferences, and exhibiting the Hi-Lux Optics Off-Set Plates with 1/2in 60 Degree Base is something that we are pleased to do. And since we will not charge for shipping on purchases of $49 or over, there may not be a more rewarding opportunity to pick the exceptional Hi-Lux Optics Off-Set Plates with 1/2in 60 Degree Base. For an awesome way to verify that you are utilizing some of the very best that the community is offering, select the Hi-Lux Optics Off-Set Plates with 1/2in 60 Degree Base.

LeatherWood Off-Set Plate with 1/2in 60 Degree Base gives the scope plenty of hammer clearance, yet does not have the scope setting so far off to the side that the shooter has to pull his or her head off of the butt stock to properly align their eye with the rear lens.

One problem the muzzleloading shooter and hunter runs into when trying to install a Rifle Scope on a muzzleloader of very traditional "side-hammer" design is getting the scope off-set enough to insure that the hammer can still be drawn back to full cock - and that it does not hit the scope tube when the trigger is pulled. No one mount arrangement works well with all rifles. However, for the vast majority of those who shoot and hunt with a rifle of traditional styling, their rifle of choice is three-fourths of the time a percussion ignition rifle with an octagonal barrel.

For those rifle owners, Leatherwood/Hi-Lux Optics now offers a simple set of off-set bases that gives the scope plenty of hammer clearance, yet does not have the scope setting so far off to the side that the shooter has to pull his or her head off of the butt stock to properly align their eye with the rear lens. Depending on the caliber, load and especially the amount of recoil produced, these Leatherwood bases can be attached to the top flat of an octagon barrel using either two or three screws. Three holes for attaching are pre-drilled on the plate.

The blocks are attached and one of the 1880s style Malcolm scopes can be easily slipped right on and tightened in place. (These come in 17" long 3x and 18" long 6x models.) Location of the bases on the barrel is determined by where the scope will need to set in order to provide the proper eye relief, which can be adjusted several inches forward or rearward by loosening the ring of the front Malcolm mount and sliding the scope in the direction it needs to go. Also, the simple design of the Leatherwood off-set bases allow them to be simply turned around and mounted with the blocks off-set in the other direction on left-handed rifles.

Specifications for Hi-Lux Optics Off-Set Plates with 1/2in 60 Degree Base:

Features of Hi-Lux Optics Off-Set Plates with 1/2in 60 Degree Base

• Posa Cut and Half Moon Cuts
• For Malcolm Short Scopes (3X and 6X)

Package Contents:

• Hi-Lux Optics Off-Set Plates with 1/2in 60 Degree Base